How to add a license to a Brocade VDX6740T-1G switch

In order to license a particular feature on a Brocade VDX 6740T-1G switch you’ll need:

  • transaction key (22 characters long string received from your Brocade supplier, which is bound to a particular feature, for example BR-VDX6740T-1G-16X10G-COD (to add 16x10GB Capacity on Demand feature) or BR-VDX6740-2X40G-POD (to unlock two remaining QSFP ports));
  • access to the Brocade portal (Software Licensing section);
  • license ID of the switch where the license is going to be attached to.

To get a license ID, log in to the switch and run:

  1. show license id rbridge-id 12
  2.  
  3. ===================================================
  4.   12                    XX:XX:XX:XX:XX:XX:XX:XX

Since all my VDXs are in a VCS Logical Chassis mode, I have to specify the rbridge-id of the member.

Login to the Brocade portal, go to Software Licensing and enter the transaction key. On the next page you’ll be prompted for an email address and the license ID.

Once generated, you’ll receive a XML file with the long string between licKey tags.

Copy it (omit licKey tags) and execute on the switch:

  1. license add rbridge-id 12 licStr "XX XXXXXXXX#"

Make sure to place the license inside quotes, since normally there is a space in the license key.

To check whether the license was deployed run:

  1. show license rbridge-id 12
  2.  
  3. rbridge-id: 12
  4. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  5.        10G Port Upgrade license
  6.        Feature name:PORT_10G_UPGRADE
  7.        License is valid
  8.        Capacity: 16

Tags: , , , ,

Leave a Reply