make buildworld & HP ProLiant BL460c G7

Upgrade from 11.1-RELEASE to 11.1-RELEASE-p3

Brand: HP ProLiant BL460c G7

I wasn’t able to make it boot from the iLO virtual CD/USB interface no matter what I tried, hence locally attached USB CD-ROM was the only way to install the OS.

Secondly, no network adapters will be recognized after the installation is completed. Therefore, make sure you include src from the system components window, so you can rebuild the kernel with the following stanza added (GENERIC doesn’t include it):

device oce

Processor: 1 x Intel Xeon L5640 2.27 GHz (6 cores)
Memory: 16GB
HDD: 2 x 300GB (10k RPM, 6Gbps SAS 2.5-inch) in RAID1

Softupdates: ON

CPU: Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (2266.79-MHz K8-class CPU)
real memory = 17179869184 (16384 MB)
avail memory = 16598376448 (15829 MB)
da0 at ciss0 bus 0 scbus2 target 0 lun 0
da0:  Fixed Direct Access SPC-3 SCSI device
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 286070MB (585871964 512 byte sectors)

make -j4 buildworld: 1h 6m 23s
make -j4 buildkernel: 5m 26s
make installkernel: 19s
make installworld: 3m 12s

Tags: , , , , , , ,

Leave a Reply