Posts Tagged ‘env’

make buildworld & HP ProLiant BL460c G7

Saturday, November 11th, 2017

Upgrade from 11.1-RELEASE to 11.1-RELEASE-p3

Brand: HP ProLiant BL460c G7

I wasn’t able to make it boot from the iLO virtual CD/USB interface no matter what I tried, hence locally attached USB CD-ROM was the only way to install the OS.

Secondly, no network adapters will be recognized after the installation is completed. Therefore, make sure you include src from the system components window, so you can rebuild the kernel with the following stanza added (GENERIC doesn’t include it):

  1. device oce

Processor: 1 x Intel Xeon L5640 2.27 GHz (6 cores)
Memory: 16GB
HDD: 2 x 300GB (10k RPM, 6Gbps SAS 2.5-inch) in RAID1

Softupdates: ON
SMP: ON

  1. CPU: Intel(R) Xeon(R) CPU L5640 @ 2.27GHz (2266.79-MHz K8-class CPU)
  2. real memory = 17179869184 (16384 MB)
  3. avail memory = 16598376448 (15829 MB)
  4. da0 at ciss0 bus 0 scbus2 target 0 lun 0
  5. da0: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device
  6. da0: 135.168MB/s transfers
  7. da0: Command Queueing enabled
  8. da0: 286070MB (585871964 512 byte sectors)

make -j4 buildworld: 1h 6m 23s
make -j4 buildkernel: 5m 26s
make installkernel: 19s
make installworld: 3m 12s

make buildworld & IBM x3550 m3

Saturday, June 24th, 2017

Upgrade from 11.0-RELEASE to 11.1-BETA3

Brand: IBM x3550 m3

In order to successfully boot the server make sure to enable legacy support as per this thread.

Processor: 2 x Intel Xeon E5620 2.40GHz (4 cores each)
Memory: 8GB
HDD: 2 x 146GB (10k RPM, 6Gbps SAS 2.5-inch) in RAID1

Softupdates: ON
SMP: ON

  1. CPU: Intel(R) Xeon(R) CPU E5620  @ 2.40GHz (2400.13-MHz K8-class CPU)
  2. real memory  = 8589934592 (8192 MB)
  3. avail memory = 8244543488 (7862 MB)
  4. mfi0: <LSI MegaSAS Gen2> port 0x1000-0x10ff mem 0x97940000-0x97943fff,0x97900000-0x9793ffff irq 16 at device 0.0 on pci11
  5. mfi0: Using MSI
  6. mfi0: Megaraid SAS driver Ver 4.23
  7. mfi0: FW MaxCmds = 1008, limiting to 128
  8. mfid0: 139236MB (285155328 sectors) RAID volume (no label) is optimal

make -j4 buildworld: 1h 36m 28s
make -j4 buildkernel: 5m 58s
make installkernel: 13s
make installworld: 3m 32s

make buildworld & IBM x3650 m3

Sunday, September 28th, 2014

Upgrade from 10.0-RELEASE to 10.1-PRERELEASE

Brand: IBM x3650 m3

In order to successfully boot the server make sure to enable legacy support as per this thread.

Processor: 2 x Intel Xeon X5650 2.67Ghz (6 cores each)
Memory: 144GB
HDD: 2 x 72GB (15k RPM, 6Gbps SAS 2.5-inch) in RAID1

Softupdates: ON
SMP: ON

  1. CPU: Intel(R) Xeon(R) CPU X5650  @ 2.67GHz (2666.82-MHz K8-class CPU)
  2. real memory = 154618822656 (147456 MB)
  3. avail memory = 150235295744 (143275 MB)
  4. mfi0: <LSI MegaSAS Gen2> port 0x1000-0x10ff mem 0x97940000-0x97943fff,0x97900000-0x9793ffff irq 16 at device 0.0 on pci1
  5. mfid0: 68664MB (140623872 sectors) RAID volume (no label) is optimal

make -j4 buildworld: 31mm 20ss
make -j4 buildkernel: 03mm 31ss
make installkernel: 09ss
make installworld: 58ss

make buildworld & Asus P5KPL-VM

Tuesday, September 16th, 2008

Upgrade from 7.0-RELEASE to 7.1-PRERELEASE

Brand: N/A
Motherboard: Asus P5KPL-VM

Processor: Intel Core 2 Duo E6550 2.33Ghz
Memory: 2GB DDR2 800
HDD: 250GB 7200rpm SATA150

Softupdates: ON
SMP: ON

  1. CPU: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2331.01-MHz 686-class CPU)
  2. real memory = 2147090432 (2047 MB)
  3. avail memory = 2091548672 (1994 MB)
  4. ad4: 238475MB <MAXTOR STM3250310AS 3.AAC> at ata2-master SATA150

make -j4 buildworld: 17mm 55ss
make -j4 buildkernel: 07mm 56ss
make installkernel: 12ss
make installworld: 01mm 39ss