Posts Tagged ‘monitoring’

FreeBSD template for ManageEngine OpManager

Friday, March 18th, 2016

We use OpManager by ManageEngine to monitor our infrastructure. Most of Linux flavors are already covered by default templates in OpManager. Moreover, you’ll be able to get interface statistics and CPU/RAM utilization of FreeBSD servers with the included UCD SNMP MIBs. The only bit that was missing was the monitoring of partitions for FreeBSD, hence I decided to spend a bit of my time and finally make the template that could be used in OpManager to monitor FreeBSD servers.

It’s confirmed to work with the latest OpManager 11 (build 11600) and FreeBSD 10.x without UCD Net-SNMP installed but only bsnmp with bsnmp-ucd. The reason why bsnmp is simple: bsnmp is light and is part of the base FreeBSD, so you don’t need to install anything and bsnmp-ucd (available under /usr/ports/net-mgmt/bsnmp-ucd) is a module for bsnmpd which implements parts of UCD-SNMP-MIB, while UCD Net-SNMP requires a massive amount of dependencies to be installed.

Once bsnmp-ucd is installed you might want to enable ucd module in /etc/snmpd.config and restart bsnmpd:

  1. # UCD module
  2. begemotSnmpdModulePath."ucd" = "/usr/local/lib/"

So here we go (you can also download it from here, just make sure to change the extension to XML):

  1. <?xml version="1.0" encoding="UTF-8"?>
  2. <CustomDevicePackage>
  3. <CustomDevicePackage deviceType="FreeBSD" iconName="linux.png" pingInterval="5">
  4. <SysOIDs>
  5. <SysOID oid="."/>
  6. </SysOIDs>
  8. <Graph SaveAbsolutes="false" YAXISTEXT="Percentage" customGraph="false" description="Monitors the Memory utilization based on UCD SNMP MIB" displayName="Memory Utilization(UCD SNM MIB)" failureThreshold="1" graphID="966" graphName="Lin-MemoryUtilization" graphType="node" isNumeric="true" oid="(.*100/." period="900" protocol="SNMP" sSave="true" timeAvg="false">
  10. </Graph>
  11. <Graph SaveAbsolutes="false" YAXISTEXT="Percentage" customGraph="false" description="Monitors the CPU Utilization based on UCD SNMP MIB" displayName="CPU Utilization(UCD SNMP MIB)" failureThreshold="1" graphID="315" graphName="Lin-CPUUtilization" graphType="node" isNumeric="true" oid="." period="900" protocol="SNMP" sSave="true" timeAvg="false">
  12. <OTHEROIDS/>
  13. </Graph>
  14. <Graph DisplayColumn="." Index="." SaveAbsolutes="false" YAXISTEXT="Percentage" customGraph="false" description="Monitoring the usage in each partition of the FreeBSD Device." displayName="Partition Details of the FreeBSD Device (%)" failureThreshold="1" graphID="252000" graphName="BSDPartitionWiseDiskDetails" graphType="multiplenode" isNumeric="true" oid="(.*100/." period="900" protocol="SNMP" sSave="true" timeAvg="false">
  15. <OTHEROIDS/>
  16. </Graph>
  18. <Category name="Server"/>
  19. <Vendor name="net-snmp"/>
  20. <Version version="2016031804"/>
  21. </CustomDevicePackage>
  22. </CustomDevicePackage>

Noteworthy sections:

SysOID oid=: this is the FreeBSD system identifier. When you’re going to add a new FreeBSD server the template will be automatically attached based on SysOID.

CPU and RAM sections were copied from the standard Linux template.

DisplayColumn=: . is a list of available partitions (/, /usr, /var, etc.).

Index=: . is a list of IDs of available partitions.

oid=: (.*100/. is used to calculate the percentage of utilization of a particular partition, where . is used space and . is available space.

Hope it helps.